1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Erasing all your keys and starting over

Discussion in 'Generation 1 Prius Discussion' started by no332, Oct 27, 2012.

  1. no332

    no332 Junior Member

    Joined:
    Oct 23, 2012
    13
    4
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    Long story short, I believe someone stole my valet key and I want to deactivate it. I've read the instructions
    from Programming New Keys, but I'm afraid if I erase all my keys how will I reprogram it? Will it accept the first master key inserted to program, since there will be none stored in the memory? Will I need to do the initial procedure to marry a master key to the ECU and let it set for 30 minutes?

    Any info would be appreciated. This is a gen1 Prius, but I believe it uses the same interlock system.
     
    #1 no332, Oct 27, 2012
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,913
    16,216
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The erase-all operation forgets all keys except the one you use to do the operation. Then you can proceed to use it program in others.

    I would suggest signing up on techinfo.toyota.com so you can read the procedure in the manual directly. There is enough detail in there (on the timing of the key turns and door openings, etc.) that most summaries on the 'webs don't include it all, and I'm not sure they're all complete. (I don't think anybody sets out to get it wrong, it's just something that can happen to detailed technical information when it gets copied and re-copied by people writing in a hurry.)

    -Chap
     
    #2 ChapmanF, Oct 29, 2012
    no332 and bwilson4web like this.
  3. no332

    no332 Junior Member

    Joined:
    Oct 23, 2012
    13
    4
    0
    Vehicle:
    2001 Prius
    Model:
    N/A
    Thank you so much for that info... Will definitely check out the site :)
     
    #3 no332, Oct 29, 2012
(You must log in or sign up to post here.)