locksmith recommendation in NYC area for prius 2010 smartkey programming

I don't have a NY recommendation, but you need some info.

"key" is the mechanical "emergency key" that is stored inside the fob. It only unlocks the car doors.

"fob" is the remote that contains the circuitry to unlock the doors wirelessly, either via the buttons or by proximity. It contains additional wireless circuitry that permits the vehicle to run, and a back-up mode to starting the car in case of fob battery failure.

The emergency key is a "laser cut" or "four channel, internal cut, sidewinder" key. A special, expensive, milling type cutter is required to "duplicate" one, and even more expensive machines to "originate" a key from "code" (numbers that describe the profile cuts). Call around using the terminology given, and someone will have the correct machine. Probably a locksmith. Dealer will charge you around $100. If you strike out, send me a private message - I can duplicate by mail.

Programming the fob has two flows: 1) Adding a new, virgin key. 2) Resetting the SKS module to accept a used fob, one previously registered to another car.

Scenario 1 requires either "Techstream Lite", or proprietary equipment. No magical "seed generating software".

Scenario 2 requires Scenario 1 equipment, plus magic dust software to reset the SKS module. PM again if you have no other options, I am a last ditch option.

I think you want another SKS fob added, emergency key included. $200 will probably mean a used fob, but you might get lucky.

I lied, I might be able to find a post listing a NY vicinity locksmith with the capability. You need to be patient & wait for me to get to my pc after I get some sleep. I'm running on 3hrs sleep in the past 50... and no, I'm not a crackhead

EVO ? 2

EDIT: reprograming used smartkeys for 2010 prius | PriusChat

 

Hokay. I called around and found a place in North Brunswick, NJ. I suppose that's vaguely the New York metro area. He programmed an unprogrammed key I had bought from a dealer and had no problems cutting the metal key. He did both for, I think, around $45 or so. He had some specialized software on a laptop that he used for the electronic stuff. It's been a while but I think the place is DDR Security in North Brunswick, NJ.

Next: there's some locksmith on Long Island who was reported to have done the above, but was also capable of reprogramming (or whatever) an already programmed key. His name/business was mentioned a year or so ago, so maybe searching the archives will give you a live body.

Finally: I just kept on calling locksmiths until I found one who said he could do it. Most of them had no clue what I was talking about, a couple did, but couldn't do the work, and then I found the DDR guy. Moral: Be persistent. And a copy of the no-kidding yellow pages helps.

KBeck.

 

This is as close as I could find. All Auto Locks phone: 516-356-4800 Copiague , NY (Long Island )

 

I tried All Auto Locks because I also need a fob and programming. He now wants $340 for a new fob and programming or $145 for programming a used fob with no guarantee that it will work and money due in any case.

So I am also still looking. H00ktern might have a mobile solution and suggested to me if I can get a group together the price might be favorable. Would you be interested in a DIY solution with a used fob? That would make two of us and the start of a group.

 

Better yet, realize the hassle now and deal with it on your terms, rather than the dealers'

 

I hope you have got the Locksmith for your work.I also have the same issue with keys and i have bought two keys from ebay and cut and programmed by a local Locksmith it doesn't cost me more in comparison to the dealer.