Heather's Mods (my 2007 Silver Pine Mica)

Discussion in 'Gen 2 Prius Accessories & Modifications' started by Corwyn, Aug 21, 2011.

Page 1 of 2
  1. Corwyn

    Corwyn Energy Curmudgeon

    Joined:
    Mar 6, 2011
    2,171
    659
    23
    Location:
    Maine
    Vehicle:
    2007 Prius
    Model:
    II
    Well I think I am mostly done with modding my new Prius, so I thought I should display it to all those that helped with advice and inspiration. Thank you all kindly.

    Reflectors on the doors:
    [​IMG]
    [​IMG]
    These were the suggestion of Hobbit. The red and white reflective tape is on the normally hidden surfaces, and with just the flash from the camera it looks even brighter than the upgraded LED door courtesy lights.

    Replacing tail lights with (red) LEDs:
    [​IMG]
    The red LED is on the left, and the original incandescent on the right. (ignore the halfway completed red tint on the brake lights)

    Debadging & Red tint on the brake lights:
    [​IMG]
    I removed the 'Toyota' and the 'HSD' badges which I think gives a cleaner look. These (plus the 'Prius') are the only badges I could remove without leaving holes.

    It is my opinion that red tinting on the brakes lights will help following drivers know where to expect red brakes lights. I also think it looks better.

    Blackened the remaining badges:
    [​IMG]
    [​IMG]

    Grill blocking:
    [​IMG]
    Grill blocking on the upper section (lower section was also done to 80%)

    Highlighting of raised lettering on liquid reservoirs:
    [​IMG]
    I just used a Sharpie to make these a bit more visible.

    Dragon decal:
    [​IMG]
    I used some of the leftover red tinting material to make this dragon, to show off her personality.

    MFD shade:
    [​IMG]
    [​IMG]
    I used the dealer front license plate advertising to construct a shade for the MFD. After cutting to shape, I coated it with some of the plasti-dip from blackening the badges.

    The rest of the mods are: removing wheel rims, upgrading all interior lights, with LEDs. Turning off the reverse beeping. I might still upgrade the license plate lights to LEDs, and blacken the chrome 'smile' on the front grill.
     
    #1 Corwyn, Aug 21, 2011
  2. xs650

    xs650 Senior Member

    Joined:
    Jul 2, 2010
    4,539
    1,435
    9
    Location:
    Northern California
    Vehicle:
    2010 Prius
    Model:
    II
    That's nice tasteful looking work.
     
    #2 xs650, Aug 21, 2011
    1 person likes this.
  3. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I agree. The dragon sticker may be a bit overboard but it makes your car unique to you.

    I really like the idea of highlighting the min max levels on the reservoirs!
     
    #3 F8L, Aug 21, 2011
    1 person likes this.
  4. NYPrius1

    NYPrius1 Active Member

    Joined:
    Jul 7, 2007
    1,181
    125
    0
    Location:
    Middletown, NY
    Vehicle:
    2007 Prius
    Very Nice - And My Favorite Color Prius. Hope They Bring Back The Silver Pine Mica.
     
    #4 NYPrius1, Aug 21, 2011
    1 person likes this.
  5. Rokeby

    Rokeby Member

    Joined:
    Jan 21, 2008
    3,033
    708
    75
    Location:
    Ballamer, Merlin
    Vehicle:
    2008 Prius
    Well done.

    We seem to have similar tastes in Prius personalization. I've done
    many of the same things to mine.

    As to the MFD sun screen, it can be easily and inexpensively upgraded.
    For less than $5 you can get a ~10"x12" piece if 1/16" thick leather
    from the nat'l chain craft stores; Michaels, etc.

    It can be applied with spray-on adhesive cement. It easily wraps
    around the tight radii at the edges for a truly professional look

    For an over-the-top "luxury" feel, you can also get a same sized sheet
    of 2mm high density foam rubber for even less. Apply it only to the
    upper surface with no wrap-around at the edges. Sandwiched between
    the screen and the leather wrap it gives a slightly cushioned feel.
     
    #5 Rokeby, Aug 21, 2011
    1 person likes this.
  6. Corwyn

    Corwyn Energy Curmudgeon

    Joined:
    Mar 6, 2011
    2,171
    659
    23
    Location:
    Maine
    Vehicle:
    2007 Prius
    Model:
    II
    Laugh. So tell me, is that a goat skull on the front of your car? :)

    The dragon is a bit funny, as doesn't seem to me like something I would do for myself. It just seemed to to fit for Heather.
     
    #6 Corwyn, Aug 23, 2011
  7. ItsNotAboutTheMoney

    ItsNotAboutTheMoney EditProfOptInfoCustomUser Title

    Joined:
    Jul 18, 2009
    2,287
    460
    0
    Location:
    Maine
    Vehicle:
    2010 Prius
    Model:
    II
    Ah, that's what it's called. My wife and I say "mucus" when playing spot-the-hybrid.

    (We do like the color, but I actually didn't know the official name).

    I just have a grille block. I do keep meaning to do something about the MFD reflection on the windshield though.
     
    #7 ItsNotAboutTheMoney, Aug 23, 2011
    1 person likes this.
  8. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Very good point! Although the skull was temporary and just for the photo shoot. It's like a model wearing skimpy clothing for a shoot then she changes into something else. Err umm, where am I going with this?
     
    #8 F8L, Aug 23, 2011
    1 person likes this.
  9. hyo silver

    hyo silver Awaaaaay

    Joined:
    Mar 2, 2005
    15,256
    1,580
    0
    Location:
    off into the sunset
    Vehicle:
    2004 Prius
    Model:
    N/A
    I'll attempt to rescue F8L here and say that I really like those extra reflective strips. It's a very easy 'mod' that's quite effective. And you made that dragon yourself? Wow. :)
     
    #9 hyo silver, Aug 23, 2011
    1 person likes this.
  10. amm0bob

    amm0bob Permanently Junior...

    Joined:
    May 29, 2008
    7,730
    2,547
    0
    Location:
    The last place on earth to get cable, Sacramento
    Vehicle:
    2008 Prius
    Model:
    II
    Tastefully done mods... :nod: :first: :thumb::thumb:
     
    #10 amm0bob, Aug 23, 2011
    1 person likes this.
  11. Corwyn

    Corwyn Energy Curmudgeon

    Joined:
    Mar 6, 2011
    2,171
    659
    23
    Location:
    Maine
    Vehicle:
    2007 Prius
    Model:
    II
    New additions:
    [​IMG]
    Added an inverter for providing electricity when we lose power in the house.
    [​IMG]Improved lumbar support. $15.
     
    #11 Corwyn, May 3, 2012
  12. macmaster05

    macmaster05 Senor Member

    Joined:
    Sep 27, 2009
    4,050
    730
    5
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    Two
    I like that lumbar thing. I just don't like how it looks. It's like wearing headgear or something. It's embarrassing to be seen using, but it's worth it.
     
    #12 macmaster05, May 4, 2012
    1 person likes this.
  13. sidecar

    sidecar Member

    Joined:
    Dec 29, 2010
    342
    44
    0
    Location:
    Australia
    Vehicle:
    2008 Prius
    Model:
    II
    believe it or not, but I know where this sort of thing ends :)
     
    #13 sidecar, May 4, 2012
  14. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I bet you do. ;)

    I used to like putting them up on top of the truck for a photo. :)

    [​IMG]
     
    #14 F8L, May 4, 2012
  15. sidecar

    sidecar Member

    Joined:
    Dec 29, 2010
    342
    44
    0
    Location:
    Australia
    Vehicle:
    2008 Prius
    Model:
    II
    we're all going to get into awful trouble here :)
     
    #15 sidecar, May 5, 2012
  16. ss_neogeo

    ss_neogeo Junior Member

    Joined:
    Jul 19, 2010
    22
    1
    0
    Location:
    Arizona
    Vehicle:
    2006 Prius
    Model:
    N/A
    Is the red tint on the brake lights a vinyl or paint? You did a good job on it.
     
    #16 ss_neogeo, May 5, 2012
    1 person likes this.
  17. drew935

    drew935 Member

    Joined:
    Jan 22, 2011
    168
    22
    2
    Location:
    Nor Cal
    Vehicle:
    2008 Prius
    Model:
    Five
    I like what you did on the tails too Heather. My wife has the same color. I debadged the rear as well, tinted all around with windshield visor, made my own mfd visor, rear sway, and chassis brace. I think next up will be a front sway or change tires from 185 to 195.
     
    #17 drew935, May 7, 2012
    1 person likes this.
  18. Corwyn

    Corwyn Energy Curmudgeon

    Joined:
    Mar 6, 2011
    2,171
    659
    23
    Location:
    Maine
    Vehicle:
    2007 Prius
    Model:
    II
    Vinyl. Same as the dragon.

    Thanks.
     
    #18 Corwyn, May 7, 2012
  19. BigFatGuy

    BigFatGuy Member

    Joined:
    Mar 11, 2011
    51
    42
    0
    Location:
    Oklahoma City
    Vehicle:
    2007 Prius
    Model:
    N/A
    Where did you find that grille block?
     
    #19 BigFatGuy, May 13, 2012
  20. Corwyn

    Corwyn Energy Curmudgeon

    Joined:
    Mar 6, 2011
    2,171
    659
    23
    Location:
    Maine
    Vehicle:
    2007 Prius
    Model:
    II
    It is Polyethylene pipe insulation, 1/2" if I recall correctly. The upper grill is filled by 1/2 sections (i.e. 180 degrees). folded. The lower with full circle pieces. All were sliced to get around the vertical braces in the area.
     
    #20 Corwyn, May 13, 2012
    1 person likes this.
(You must log in or sign up to post here.)
Page 1 of 2