1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Custom Stereo Build C2

Discussion in 'Prius c Audio and Electronics' started by actiondonkey, Apr 6, 2012.

  1. actiondonkey

    actiondonkey Member

    Joined:
    Mar 9, 2012
    91
    30
    0
    Location:
    Florida
    Vehicle:
    2012 Prius c
    Model:
    II
    I'm scheduled with my local shop SS Customs to have a custom stereo system installed. Since this setup is going to be the most extensive (and expensive) that I've done it's important to make sure the design is exactly perfect the first time.

    Head unit - Leaning towards PNX-761
    PowerAcoustik - Source Units - Ingenix - PNX-761

    Amplifier - JBL GTO5355 660wt 5ch (already owned)
    JBL GTO5355 (GTO-5355) 660W RMS 5-Channel Grand Touring Amplifier

    Front speakers - 15-MC692 Memphis MClass 6'' x 9''
    WoofersEtc.com - 15-MC692 - Memphis MClass 6" x 9" Coaxial Speakers

    Front Tweets - 15-MC1S Memphis 1" Silk Dome Tweeter Set
    WoofersEtc.com - 15-MC692 - Memphis MClass 6" x 9" Coaxial Speakers

    Rear speakers & rear tweets - 15-MCS6 Memphis MClass 6.5''
    WoofersEtc.com - 15-MCS6 - Memphis 6.5" MClass Component Speakers

    Subs - 15-SC10D4 (2x) Memphis 10'' shallow mount
    WoofersEtc.com - 15-SC10D4 - Memphis 10" Shallow 4 Ohm DVC Subwoofer

    Dash Kit - Custom Fab

    Enclosure - Custom Fab and built into spare tire area; fiberglass bottom, hard plexiglass top for viewing. Stock carpet piece can be placed over plexiglass for groceries/luggage. Subs/amp/cap will be viewable through the glass - This should end up being a real show piece.
    Setup will be similar to this but more ornate:
    http://lh4.ggpht.com/_LbJ2PNrznJA/RjY5c3TG1EI/AAAAAAAAAI8/2axMtO_KWLg/s400/IMG_0279.JPG

    Backup Camera - LP2CSB License Plate Frame
    PowerAcoustik - Accessories - Cameras - LP-2

    Steering Wheel Integration - ASWC
    Axxess Interface: Steering Wheel Control

    Digital HID headlight conversion & capacitor are also included but specific products haven't been chosen yet.

    Looks like the amp can push this nicely without risking damage to the speakers. If you have knowledge on 2ohm/4ohm power draw etc please take a look and let me know your thoughts on the setup; I'll update on this thread as the installation begins (2nd week of May) and finish with a photo guide for the do-it-yourselfer.
     
    #1 actiondonkey, Apr 6, 2012
  2. Daze

    Daze Prius C Owner

    Joined:
    Mar 14, 2012
    92
    23
    0
    Location:
    Utah
    Vehicle:
    2012 Prius c
    Model:
    Four
    Wow I love what you have planned. But for the subs, are you going to be cutting into the styrofoam inserts or will you be removing those completely?

    Also I can't wait for your photo guide, I'm going to be installing a 10" alpine type r subwoofer and might upgrade the speakers sometime in the future.
     
    #2 Daze, Apr 6, 2012
  3. actiondonkey

    actiondonkey Member

    Joined:
    Mar 9, 2012
    91
    30
    0
    Location:
    Florida
    Vehicle:
    2012 Prius c
    Model:
    II
    I'm completely removing the styrofoam inserts, mounting bracket for the spare, and of course the spare itself. The plexiglass lid will be even with where the OEM carpet sits so the stock look will be retained with the carpet in place. This setup will also allow enough sqft for the subs to do their jobs. We'll have vents in the top of the glass by the bumper to allow for the airflow plus a fan to push/pull air on each side to keep things cool.
     
    #3 actiondonkey, Apr 6, 2012
  4. vinnie97

    vinnie97 Whatever Works

    Joined:
    Mar 20, 2010
    1,430
    277
    0
    Location:
    Somewhere out there
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Never heard of PowerAcoustiks...must be especially high-end. Are they appreciably more so than JVC/Kenwood, Pioneer and Alpine?
     
    #4 vinnie97, Apr 6, 2012
  5. actiondonkey

    actiondonkey Member

    Joined:
    Mar 9, 2012
    91
    30
    0
    Location:
    Florida
    Vehicle:
    2012 Prius c
    Model:
    II
    Actually no, most consider them a 2nd tier brand to the kenwood and pioneer line. However this Power Acoustik head I'm looking at is a brand new model and the features are really impressive... native navteq, bluetooth 3.0, automatic backup camera switching, up to 250gb hd compatability for lots of movies and mp3s, plays divx, h264, dual zone video for rear seat monitor playback, and most importantly it just looks cool!

    The only other head I've found with those features is the Kenwood DNX9990HD which costs about $700 more.
     
    #5 actiondonkey, Apr 6, 2012
  6. Tek55

    Tek55 Junior Member

    Joined:
    Mar 25, 2012
    96
    11
    0
    Location:
    Houston
    Vehicle:
    2012 Prius c
    Model:
    Two
    I'd be interested to see the speed of the head unit, looking at a kenwood dnx9990hd now based on menu speed but the pics look nice on the ingenix
     
    #6 Tek55, Apr 7, 2012
  7. vinnie97

    vinnie97 Whatever Works

    Joined:
    Mar 20, 2010
    1,430
    277
    0
    Location:
    Somewhere out there
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    ^Off-topic: That's some awesome MPG you're getting, Tek55. :eek:
    10-4, so they're the economical off-brand choice (but feature-packed)...bit of a roll of the dice but feature-wise, it definitely stacks up. I already detailed what head unit I own (KW-NT3DHT), but the map update last year (which costs $100) only contains maps from 2009. :rolleyes:

    You should be forewarned this is apparently par for the course with JVC and GPS support...I am less likely to choose them when I upgrade.
     
    #7 vinnie97, Apr 7, 2012
  8. Melissa5588

    Melissa5588 New Member

    Joined:
    Apr 16, 2012
    16
    4
    1
    Location:
    Tampa Fl
    Vehicle:
    2012 Prius c
    Model:
    One
    I thought I read somewhere that the front speakers are 6.5 inch?
     
    #8 Melissa5588, May 3, 2012
  9. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I would look at different components if you are going for sound quality. Look for for high voltage RCA outputs with low impedance and 24bit digital to analog converters. You can also simply compare the above stats to a top end Kenwood eXcelon piece and see how they rate. Unless things have changed significantly the components you have chosen are budget items and sound quality is so-so. Still, if you are on a budget and want lots of stuff then it's not so bad and it is a huge step above stock! :)
     
    #9 F8L, May 3, 2012
(You must log in or sign up to post here.)