Anybody gotten Blizzard Pearl side molds?

These match perfectly....
Body Side Moulding - Blizzard Pearl 070 at Sparks Toyota-Scion, Myrtle Beach, SC

Order a couple of TRD oil filters when you're there too:
http://www.trdsparks.com/displayparts.php?Mdl_dtl=718&Part_cat=30&parts_id=3423

 

Yeah, my brother in law owns a high end body shop- I brought them over and we put them on in under an hour. Since they're tapered- you have to find the center-line and mark the car, then tape the moldings on using that center-line- then use blue tape to mask the line created by the bottom of the molding. Remove moldings again and use blue tape as your guide in your permanent application. He also prepped the door with wax and grease remover. It's a two person job if you want to do it 100% perfect. We measured the front and rear center-line height on the first side then did the other side to make sure the two sides were even.
Sorry, no pix yet- too busy w/a major patio project at home.

No chrome insert- must be just a reflection you see in the ad photos. The moldings are actually painted with the Blizzard Pearl paint- you can clearly see the metallic speckles in the moldings.


FWIW- adding these moldings and the Euro-style mud guards really sports up the car.. of course the 17" wheels on the five help too

 

Check out NineScorpions' car. They're the way to go if you need side moldings.

 

Same place as the aforementioned link. The 2012 side body is unchanged from 2010/11 so yes, these moldings will fit.

 

Don't like them. They're rather distracting.

Also, I don't think you should pair the chrome rockers and side moldings. The two together add too much to the body. Contrary to popular belief, moldings won't provide significant protection against dings as you can still get them above and below the moldings due to varying height of vehicles.

 

Confirmed- Nine Scorpions moldings are identical to the ones I ordered from Sparks.
I prefer their angular look rather than the rounded look to the other moldings. To me the Gen III is overall angular, the Gen II is more rounded/curved.
... to each his own

 

Finally got around to taking a few photos...

 

Looks great. Now, don't make the same mistake some people do like adding the chrome lower rocker moldings, which together with the side moldings makes the side too busy.

 

where did you get that trim on the bottom of your doors and below the back window (above the license plate)?

 

I noticed in your pics that there's a raised middle line running through the bodyside moddings. After taking a closer look at NineScorpions' car, I noticed them now. Thanks for the upclose pics. I can't see them on sparks' website. It was disconcerting when I first saw them but now theyre growing on me. Will probably have to order soon.