1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Tinting for a 2011 Prius

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Sushi_1001, Sep 12, 2011.

  1. Sushi_1001

    Sushi_1001 Junior Member

    Joined:
    Sep 7, 2011
    77
    9
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    Two
    I am planning to tint the new Prius for all 10 windows. Does both the hatch window have any factory tint, it would seem darker than any of the other windows?

    Also I in Calif. therfore ehat is the recommended darkness I can go without getting a ticket? (not the legal limit but the recommended darkeness that I can go )

    Also if this is not too much trouble can anyone recommend a Leather Steering Wheel Cover, I missed my factory leather covered from my previous car.

    Many thanks in advance.
     
  2. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,323
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    Are you in socal or norcal?

    When I was in orange county during vacation, it seemed like 75%+ of the cars I saw had 35% or darker on the front windows. Here on the central coast, those cars wouldn't last an hour.

    I'd say llumar Air Blue 80 or Premier's Diamond Cut IR 73 are the only films that are truly safe for the front windows. Anything else is a crapshoot. For the rears I would not go darker than 30% due to nighttime visibility.

    MB860 ?
     
  3. 32kcolors

    32kcolors Senior Member

    Joined:
    Jul 14, 2009
    5,683
    953
    124
    Location:
    Redondo Beach, CA
    Vehicle:
    2010 Prius
    Model:
    V
    Legally, you can't tint the front side windows any further because the factory glass is already near the limit. In practice, however, you can get away with 50% tint on front side windows (for an aggregate of ~37.5%) if you're in socal. I had 35% on a previous car for 10 years without getting ticketed. Any darkness can be used on the other windows other than windshield.

    The lower rear hatch is factory-tinted 29% in the glass.
     
  4. Sushi_1001

    Sushi_1001 Junior Member

    Joined:
    Sep 7, 2011
    77
    9
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    Two
    Thank you both for the advice.

    Yes, I am in Sol Cal.

    My wife's 2009 Accord Sedan is done at 23% all around and looks great, I want the same for my Prius but it has some factory tint. Therefore, in order for me to achieve her 23% what % can I tint my Prius front, back, and hatch.

    Many thanks....
     
  5. 32kcolors

    32kcolors Senior Member

    Joined:
    Jul 14, 2009
    5,683
    953
    124
    Location:
    Redondo Beach, CA
    Vehicle:
    2010 Prius
    Model:
    V
    Factory tint is ~75%, therefore you'll want a 30% film for an aggregate of ~23% (~75% x 0.30 = ~22.5%). On the lower rear hatch which is 29%, you can leave it alone or black it out even more using the same film if you like the blacked out look there.
     
  6. tofuprince

    tofuprince New Member

    Joined:
    Apr 8, 2010
    8
    0
    0
    Location:
    los angeles
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    i got my car tinted at 20% all around. you can check it out if you want i think it looks great. also if you want a good shop you can contact me for the info.
     
  7. Sushi_1001

    Sushi_1001 Junior Member

    Joined:
    Sep 7, 2011
    77
    9
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    Two
    Thanks for the reply. How about the glass on the told half of the hatch? Would that be 30% as well ?
     
  8. 32kcolors

    32kcolors Senior Member

    Joined:
    Jul 14, 2009
    5,683
    953
    124
    Location:
    Redondo Beach, CA
    Vehicle:
    2010 Prius
    Model:
    V
    Yes, the glass on the top half of the hatch is factory tinted 74% so it'll be around 23% when you apply a 30% tint.
     
  9. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,323
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    You'll need to tint the bottom glass as well, if you want the glass to have the same color from the inside.
     
  10. 32kcolors

    32kcolors Senior Member

    Joined:
    Jul 14, 2009
    5,683
    953
    124
    Location:
    Redondo Beach, CA
    Vehicle:
    2010 Prius
    Model:
    V
    No, it's still going to be slightly different because lower hatch glass is tinted dark gray whereas the rest of the windows are green. Putting the same film over them may mask the color difference slightly but they still won't be the exact same color.
     
  11. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,323
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    True, but it will be relatively close-- and much better than no film at all.

    However, Huper Optik matches the factory tint perfectly. :D
     
  12. Sushi_1001

    Sushi_1001 Junior Member

    Joined:
    Sep 7, 2011
    77
    9
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    Two
    At what % do I need to tint the lower hatch window to have all windows match ?

    Thank you in advance.
     
  13. 32kcolors

    32kcolors Senior Member

    Joined:
    Jul 14, 2009
    5,683
    953
    124
    Location:
    Redondo Beach, CA
    Vehicle:
    2010 Prius
    Model:
    V
    Elementary school math. Divide 0.23 by 0.29 (as the lower hatch is factory-tinted 29%) and the result is 0.79 or 79%, so you'll need a 80% film to match. However, unless you get the Air Blue 80 all around I'd just go with the lightest % film of the brand you're getting for 30% film so the color is consistent. It might be slightly darker but shouldn't be that noticeable.
     
  14. Tommy@SAF

    Tommy@SAF Nu Member

    Joined:
    Sep 13, 2011
    48
    3
    14
    Location:
    Los Angeles, CA
    Vehicle:
    2011 Prius
    Model:
    Three
    I live in Socal, Los Angeles Area to be exact. I had my hatch windows tinted to 90% which is near Limo and my 8 door windows tinted to 50% all around. I've had them for about 6 months and i haven't got into any trouble with the popo. If i see a police coming my way or waiting around, i just roll down my two front windows.

    I'll post up pictures if you would like.


    Anyways, GOOD LUCK! :D
     
  15. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,323
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    Also, any color difference is mainly going to be visible from the inside, not outside. From the outside, as long as the shade you choose is "in the ballpark," you will not be able to notice the difference.

    If you go with Huper, I can say that tinting the back windows with Huper Optik 30 and using Huper Optik 40 on the privacy glass piece will result in a near perfect match, imo.
     
  16. Sushi_1001

    Sushi_1001 Junior Member

    Joined:
    Sep 7, 2011
    77
    9
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    Two
    Thanks guys, any info on a leather steering cover to look factory.
     
  17. Sushi_1001

    Sushi_1001 Junior Member

    Joined:
    Sep 7, 2011
    77
    9
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    Two
    Sure, can you post ome pics if you don't mind?
     
  18. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,323
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    The heat rejection of window tint is not always dependent on the darkness. For instance, Llumar's Air Blue 80 has a TSER rating in the 50 range (IIRC) and is an 80% film.

    Ceramic films will deliver far superior heat rejection at much lighter shades. However, most ceramic films I've seen have a more brownish, rather than deep black appearance. Not sure if appearance is the top priority here. If it is, then I think Suntek Carbon XP is a good film to consider since it has that deep black appearance yet has very good heat rejection for a dyed/carbon film.

    http://www.suntekfilms.com/common/files/SunTek-Window-Films-automotive-specsheet.pdf
     
  19. SmellyTofu

    SmellyTofu Average punter

    Joined:
    Dec 20, 2005
    251
    29
    0
    Location:
    Sydney
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A