Rear wheel bearings.

Does anyone have the manufacturers part number for the 2008 Prius rear wheel bearing(s) actual numbers on the bearing, not the hub. I have access to a press to push the bearings out and in but need to keep the car on the road till I replace the bearing witch at this time has a slight hum. The bearing hub in UK is £240 for non Toyota part, and as a pensioner need to save money.

 

Thanks Halpos4 but the rear hub can be dissembled with a suitable press and the bearing replaced for about £35 saving over £200 for a little bit of extra time witch I have plenty of.

 

This is what i am hoping , by the way the front bearings can be changed as well kit can be had from ebay £54.
Where are you in Ireland i am thinking of coming over for a holiday this year, been many times (working) to Dublin and Galway and was always made very welcome. Will bring the prius and maybe the wife.

 

If I come over I will look you up and buy you a Guiness. I would youse the high speed ferry from Hollyhead to Dublin.

 

I just double checked and you are correct they are marked 03 but I believe the bearings are the same (do not quote me) I have also found some at £35. I cannot believe the Prius rear bearings are special I think they are possibly the same as the Auris or Aventis but I will find out, and when I do the job I will write it up and post pictures.

 

You do not state if you are talking about front or rear wheels, the rears should be free to rotate apart from very slight disk brake rub, and the fronts with both wheels off the ground will have some resistance (turning the differential) but should still turn smoothly and easy by hand.