1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Lowering Springs for '07 Prius Touring

Discussion in 'Gen 2 Prius Accessories & Modifications' started by vdubdcu, Feb 28, 2011.

  1. vdubdcu

    vdubdcu New Member

    Joined:
    Feb 17, 2008
    7
    1
    0
    Location:
    Dallas, TX
    Vehicle:
    2007 Prius
    Model:
    N/A
    I have a 2007 Prius Touring Edition and ready to lower the car. I've been going back and forth at forums and merchant sites and finding conflicting information on what is compatible. What springs have you guys used or know of that can be installed in a Touring Prius? Coilovers is out because of budget... Please help. I'm ready to buy the springs.
     
  2. macmaster05

    macmaster05 Senor Member

    Joined:
    Sep 27, 2009
    4,050
    730
    5
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    Two
    H&R springs work with the Touring. That is what I and Fingas use on our Tourings. H&R will not confirm this because they think the Touring is a station wagon. Nevertheless it works. After all it was made for the euro Prius which is essentially the US Touring. The drop is a nice raked stance 1.4"/0.7"

    B&G springs also work with the Touring but they are less reputable and 1" drop all around (not raked).

    Eibach springs will NOT work with the Touring. Their inner diameter bottom coil is too narrow for the Touring strut. I have called Eibachs R&D to confirm this.

    I was in your position 5 months ago so I know your angst and frustration but trust the homework I've done. Good luck!
     
    ebxgsxr likes this.
  3. vdubdcu

    vdubdcu New Member

    Joined:
    Feb 17, 2008
    7
    1
    0
    Location:
    Dallas, TX
    Vehicle:
    2007 Prius
    Model:
    N/A
    Thank you macmaster05!!! Did you install a camber kit with your Prius?
     
  4. macmaster05

    macmaster05 Senor Member

    Joined:
    Sep 27, 2009
    4,050
    730
    5
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    Two
    Nope. I've driven 8000 miles with my springs now, and have had 2 alignments. My camber has never been a problem.

    However, on my most recent alignment my rear left toe was out of spec, which is not adjustable. However, I'm not worried. All I have to do is keep an eye on this, but I doubt it will need a custom alignment. I just gotta keep up with my tire rotations. :)
     
  5. darelldd

    darelldd Prius is our Gas Guzzler

    Joined:
    Jan 17, 2006
    6,057
    389
    0
    Location:
    Northern CA
    Vehicle:
    2006 Prius
    Hmmm. And I'm looking to LIFT the sagging rear of my non-touring '06. Any love there??
     
  6. vdubdcu

    vdubdcu New Member

    Joined:
    Feb 17, 2008
    7
    1
    0
    Location:
    Dallas, TX
    Vehicle:
    2007 Prius
    Model:
    N/A
    I appreciate your help. I just ordered the springs from tirerack.com. Looking forward to the drop. Thanks again macmaster05!
     
  7. macmaster05

    macmaster05 Senor Member

    Joined:
    Sep 27, 2009
    4,050
    730
    5
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    Two
    Absolutely! :) Show us pictures when you're done! :D

    Hmmm....The best thing I could suggest is new OEM springs. Although I'm not sure if that's actually the cause of the sag. Springs should not sag very much. You might want to also look into new struts...that could be it too.
     
  8. darelldd

    darelldd Prius is our Gas Guzzler

    Joined:
    Jan 17, 2006
    6,057
    389
    0
    Location:
    Northern CA
    Vehicle:
    2006 Prius
    Yeah, so... mostly they sag because I overload. Unloaded, everything's great. But it is only unloaded when parked. Nothing is worn out or permanently "sagged" - I just want to keep the rear end level when I'm (over)loaded. I've added air springs to my other cars - impossible to do on the Prius, from what I can determine. :sigh:
     
  9. vdubdcu

    vdubdcu New Member

    Joined:
    Feb 17, 2008
    7
    1
    0
    Location:
    Dallas, TX
    Vehicle:
    2007 Prius
    Model:
    N/A
    Success!!! I'm so happy with the results. There was a little gap in the rear setup; as indicated in previous threads but no big deal. Here are some pics...
     

    Attached Files:

  10. macmaster05

    macmaster05 Senor Member

    Joined:
    Sep 27, 2009
    4,050
    730
    5
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    Two
  11. toyotechwv

    toyotechwv Toyota Technician

    Joined:
    Nov 16, 2007
    474
    251
    0
    Location:
    Princeton, WV
    Vehicle:
    2011 Prius
    Model:
    Two
    How do they ride?
     
  12. vdubdcu

    vdubdcu New Member

    Joined:
    Feb 17, 2008
    7
    1
    0
    Location:
    Dallas, TX
    Vehicle:
    2007 Prius
    Model:
    N/A
    It took a little getting use to the tighter ride... Not bad... Worth the upgrade/drop... Now planning the Front Strut Tower Brace and Chassis Stiffening Plate install...
     
  13. Luke H.

    Luke H. Junior Member

    Joined:
    Apr 21, 2011
    15
    2
    0
    Location:
    United States
    Vehicle:
    2005 Prius
    Model:
    N/A
    So how much did the drop end up costing you when all was said and done?
     
  14. vdubdcu

    vdubdcu New Member

    Joined:
    Feb 17, 2008
    7
    1
    0
    Location:
    Dallas, TX
    Vehicle:
    2007 Prius
    Model:
    N/A
    The springs were $230 from tirerack.com and a local mechanic installed it for $175. I kept the stock struts as my car had 40k miles on it and didn't want to put out more money for new struts yet.
     
  15. Daves09prius

    Daves09prius Active Member

    Joined:
    Nov 20, 2010
    680
    161
    0
    Location:
    Gettysburg, PA
    Vehicle:
    2009 Prius
    Model:
    One
    I like the stance now that you've lowered it! Looks awesome!
     
  16. hunterxaz

    hunterxaz New Member

    Joined:
    Jan 10, 2011
    28
    0
    0
    Location:
    Salt Lake City, UT
    Vehicle:
    2007 Prius
    Model:
    N/A
    What did you do to your rims? They look like Gunmetal finish.
     
  17. LIPriusFreak

    LIPriusFreak Can I haz JDM?

    Joined:
    Apr 30, 2011
    449
    34
    0
    Location:
    Long Island, NY
    Vehicle:
    2006 Prius
    Model:
    N/A
    thats what 16" touring rims look like w/o the fugly hubcaps hiding their true beauty
     
    1 person likes this.
  18. vdubdcu

    vdubdcu New Member

    Joined:
    Feb 17, 2008
    7
    1
    0
    Location:
    Dallas, TX
    Vehicle:
    2007 Prius
    Model:
    N/A
    I agree... :)
     
    Shelby profita likes this.
  19. Shelby profita

    Shelby profita Junior Member

    Joined:
    Sep 30, 2017
    37
    6
    0
    Location:
    Phoenix, AZ
    Vehicle:
    2005 Prius
    Model:
    Three
    So I have a 2007 as well, with the base wheels. The title says base/touring. Are there differences in the suspension between the 2 trim levels. I have the package 4 with the figs and stability control..

    Posted via the PriusChat mobile app.
     
  20. Shelby profita

    Shelby profita Junior Member

    Joined:
    Sep 30, 2017
    37
    6
    0
    Location:
    Phoenix, AZ
    Vehicle:
    2005 Prius
    Model:
    Three
    Doesn't seem to be any difference. My question was if the prius 2nd gen shared any suspension with any other vehicles.

    Posted via the PriusChat mobile app.