1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Lower glove box warning

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by spiderman, Jul 16, 2010.

  1. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    Normal operation shouldn't put much pressure on the glued joint so I don't suspect any problems once in place.
    I also just remembered a post by Jimbo I think about some liner material for the glove box that looked great. I think I will try to find some of that.
    As far as junk yards up here... we have very limited stock. Not that many cars in all. Even if there was a box, I suspect it wouldn't be cheap.
    Have a good day T.
     
  2. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    I haven't actually, that would have been good in hindsight. But after about 4-5 times now, I think I have it down. Thanks for the tip though!
     
  3. tumbleweed

    tumbleweed Senior Member

    Joined:
    Oct 3, 2005
    4,067
    688
    0
    Location:
    Eastern Oregon
    Vehicle:
    2010 Prius
    Model:
    V
    [ame=http://www.youtube.com/watch?v=JqqYu7sg-e4]YouTube - Toyota Prius Cabin Air Filter[/ame]
     
  4. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    Got the box back in and the glue is holding just fine and it operates just fine. Dodged that $200/$400 bullet. :)
     
  5. KJF

    KJF Member

    Joined:
    Jun 2, 2009
    75
    17
    0
    Location:
    Small town - north central Idaho
    Vehicle:
    2010 Prius
    Model:
    II
    Note: This is a pre-2010 Prius cabin air filter change - the 2010 does not have a plastic removable tray that the filter fits into.
     
    1 person likes this.
  6. DetPrius

    DetPrius Active Member

    Joined:
    Apr 24, 2009
    545
    92
    0
    Location:
    Southeast Michigan
    Vehicle:
    2010 Prius
    Model:
    III
    Do you know if anyone has documented the 2010 cabin air filter change?
     
  7. tekmaven

    tekmaven Prius Fan

    Joined:
    Jul 19, 2010
    18
    7
    0
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    Next time someone does it, record a video!!

    The user manual says that the air filter can just be washed off. Is it better to just replace it, or can you wash it off and not keep having to buy new ones?
     
  8. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,340
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    I tried washing mine and letting it dry. I was hesitant doing this with a paper type filter but it dried nicely and seems to be working fine. I plan to pull it this weekend and check it again.
     
  9. PriusCrazy

    PriusCrazy Blizzard Pearl for Me

    Joined:
    Mar 8, 2009
    213
    28
    0
    Location:
    Triad, NC
    Vehicle:
    2010 Prius
    Model:
    IV
    10-4 JB. I can't wait to see your video. ;)
     
  10. macman408

    macman408 Electron Guidance Counselor

    Joined:
    Mar 21, 2010
    1,179
    367
    1
    Location:
    California
    Vehicle:
    2010 Prius
    Model:
    V
    The manual specifically says to not use water, but to clean it with compressed air, blowing from the clean side. But if it works for you, don't let me stop you...
     
  11. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,522
    1,797
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    A leaf blower works great!
     
  12. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,340
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    Understood. I could not find a replacement at the auto parts store at the time and I had blown mine out with compressed air but there it was still a gray film on the inlet side that was apparently very small particles. So, I tried washing it and surprisingly it cleaned up and dried very nicely. Checked it this weekend and it is doing fine.

    The auto parts store now has the filters for the 2010 Prius, so I will change it out shortly.