1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Won't run

Discussion in 'Gen 2 Prius Technical Discussion' started by FrankGreen, Apr 10, 2010.

  1. FrankGreen

    FrankGreen New Member

    Joined:
    Apr 10, 2010
    1
    0
    0
    Location:
    New Hampshire
    Vehicle:
    2008 Prius
    Model:
    V
    My 2008 Prius will not run. When I push the power button I get Master error light and check engine, abs, and others. Can only put the car in Neutral or Park. I was doing some body work; Light welding. I disconected the main ECU, removed the hv battery service plug and disconected the ground on the 12v battery. It feels like it needs some kind of a reboot. Does anyone know how to do this or what else could be wrong?
     
    #1 FrankGreen, Apr 10, 2010
  2. vertex

    vertex Active Member

    Joined:
    Mar 27, 2009
    672
    143
    0
    Location:
    new york
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Plus
    Make sure you put the safety plug in correctly, the symptoms are similar to those when it is not in.
     
    #2 vertex, Apr 10, 2010
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    which means to insert the plug, pivot the lever 90 degrees, then slide the lever to lock in place.
     
    #3 Patrick Wong, Apr 10, 2010
  4. jelloslug

    jelloslug It buffed right out!

    Joined:
    Jun 11, 2008
    813
    54
    0
    Location:
    Greenville, SC
    Vehicle:
    2008 Prius
    I second this. It took me two tries to get it right.....
     
    #4 jelloslug, Apr 12, 2010
(You must log in or sign up to post here.)