1. Attachments are working again! Check out this thread for more details and to report any other bugs.

6 CD Changer Broken

Discussion in 'Gen 2 Prius Technical Discussion' started by McShemp, Jan 14, 2010.

  1. McShemp

    McShemp New Member

    Joined:
    Sep 16, 2005
    371
    4
    0
    Location:
    SA, TX
    Vehicle:
    2006 Prius
    My factory 6 CD changer won't play CDs anymore. I tried with both retail and homemade CDs. When I toggle through the steroe options using the mode key - AM->FM->FM2->Aux->AM - the CD option doesn't appear anymore. There are no CDs in the player. When I try to insert one, it ejects it and reloads it three times before ejecting it for good. There are some red LED lights flashing on the "Load" side of the CD slot when this happens. Everything else about the stereo works fine.

    Has anyone else experienced this? Is ther a magic sequence of stereo key presses during power on (or off) that will restore the CD player? If it requires replacement, are there cheap options? Is there a step-by-step guide out there to remove the radio?
     
    #1 McShemp, Jan 14, 2010
  2. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,340
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    I do not have a 2006 but maybe this will be of some help. My wife's Honda Accord has a 6 CD changer. On hers, first you have to indicate what CD slot you want to load, then when you press the Load button, you have to wait until the flashing light under the Load button changes from red to green before you can load.

    Does the flashing light ever turn green before you try to Load, or does it turn red while attempting to load? If it is green and then turns red during the loading process, that might indicate a CD changer problem.

    On my 2010. the CD tab will not be available until a CD is loaded. Mine will also skip over the CD choice when stepping through AM, FM, SAT, etc. with no CD loaded.
     
    #2 jdcollins5, Jan 14, 2010
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    I recommend that you try disconnecting the 12V battery negative terminal, to see if that allows the CD portion of the stereo to reset.

    If that doesn't help, then you'll probably be best off by buying a replacement salvage unit.

    Here is the classic guide regarding how to disassemble the 2G dashboard:
    http://www.techno-fandom.org/~hobbit/cars/chris-dragon-dash.pdf
     
    #3 Patrick Wong, Jan 14, 2010
  4. McShemp

    McShemp New Member

    Joined:
    Sep 16, 2005
    371
    4
    0
    Location:
    SA, TX
    Vehicle:
    2006 Prius
    Two days after posting this, I was goofing around with the CD player while sitting in traffic (again). I kept trying to get it to accept a CD, but it wouldn't take it and keep it loaded. However, the cycling of the unit forced out a small piece of paper that was once part of a self-adhesive CD label. I pulled that paper out and viola! CD player operations restored.

    All I can image was that the paper was blocking a sensor in the unit. So, my lesson learned is to never use a CD label on a home-burned disc.

    Thanks to all who responded. I'll keep the dash dismantling guide for future reference.
     
    #4 McShemp, Jan 18, 2010
  5. 2009Prius

    2009Prius A Wimpy DIYer

    Joined:
    Mar 25, 2009
    2,705
    510
    63
    Location:
    USA
    Vehicle:
    2009 Prius
    Thanks for keeping us informed and congratulations on the revived CD player. :)
     
    #5 2009Prius, Jan 19, 2010
(You must log in or sign up to post here.)