1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Testing headlight level sensor?

Discussion in 'Gen 2 Prius Technical Discussion' started by ozymandias, Dec 24, 2009.

  1. ozymandias

    ozymandias Junior Member

    Joined:
    Feb 20, 2007
    83
    3
    0
    Location:
    Virginia
    Vehicle:
    2004 Prius
    Model:
    N/A
    I got the headlight level warning indicator on our 04 Prius. Well I took the sensor out and opened it up expecting to see corroded contacts but everything is perfect!

    So I don't know what could be wrong now. Does anyone have any instructions on how to test the sensor and make sure it is working properly?

    Thanks
     
    #1 ozymandias, Dec 24, 2009
  2. ozymandias

    ozymandias Junior Member

    Joined:
    Feb 20, 2007
    83
    3
    0
    Location:
    Virginia
    Vehicle:
    2004 Prius
    Model:
    N/A
    Quick update: I took it apart again and noticed that while the tops of the springs are perfectly fine, the bottoms were starting to corrode! Cleaned them up with sandpaper and hopefully that will fix the issue.

    Nobody has been able to find the same springs in stainless steel?
     
    #2 ozymandias, Dec 24, 2009
  3. johnjamis

    johnjamis Junior Member

    Joined:
    Jul 4, 2009
    79
    13
    0
    Location:
    KY
    Vehicle:
    2012 Prius
    Model:
    Two
    Did cleaning the corrosion fix the problem?
     
    #3 johnjamis, Dec 25, 2009
  4. ozymandias

    ozymandias Junior Member

    Joined:
    Feb 20, 2007
    83
    3
    0
    Location:
    Virginia
    Vehicle:
    2004 Prius
    Model:
    N/A
    Yeah, everything is working great now.
     
    #4 ozymandias, Dec 25, 2009
  5. kenmce

    kenmce High Voltage Member

    Joined:
    May 4, 2004
    1,539
    513
    0
    Location:
    NY
    Vehicle:
    Other Hybrid
    Model:
    Limited
    If you have the sensor loose from the car you can plug it in and try raising and lowering the arm that comes out from the sensor. You can raise and lower the arm and the headlights will move to follow. You have to leave it in a new position for about six seconds before the car reacts.

    While you have it open you might want to put a little dielectric grease on the springs and the connector plug.
     
    #5 kenmce, Dec 26, 2009
  6. N3FOL

    N3FOL Member

    Joined:
    Dec 2, 2007
    891
    16
    0
    Location:
    Stewartstown, PA.
    Vehicle:
    2008 Prius
    +1 on Dielectric Grease for long term protection. Anyway, where exactly is this headlight level sensor located. It might be a good thing to know right now, just in case I run into the same problem.
     
    #6 N3FOL, Dec 26, 2009
  7. kenmce

    kenmce High Voltage Member

    Joined:
    May 4, 2004
    1,539
    513
    0
    Location:
    NY
    Vehicle:
    Other Hybrid
    Model:
    Limited
    Just inside the left rear tire. You will only find it on the cars with HID headlights, the halogen models don't have it. It goes inbetween the rear axle and the body.
     
    #7 kenmce, Dec 26, 2009
  8. N3FOL

    N3FOL Member

    Joined:
    Dec 2, 2007
    891
    16
    0
    Location:
    Stewartstown, PA.
    Vehicle:
    2008 Prius
    Thanks, kenmce. I do have HIDs. The next time I crawl under my Prius, I'll make sure to take a peak near the left rear tire.
     
    #8 N3FOL, Dec 26, 2009
  9. kenmce

    kenmce High Voltage Member

    Joined:
    May 4, 2004
    1,539
    513
    0
    Location:
    NY
    Vehicle:
    Other Hybrid
    Model:
    Limited
    See also:

    04 Broken auto leveling headlights - fixed!
     
    #9 kenmce, Dec 27, 2009
  10. ozymandias

    ozymandias Junior Member

    Joined:
    Feb 20, 2007
    83
    3
    0
    Location:
    Virginia
    Vehicle:
    2004 Prius
    Model:
    N/A
    I didn't have any grease so I just hope it lasts a while the way it is. :)
     
    #10 ozymandias, Dec 27, 2009
(You must log in or sign up to post here.)