1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Removal of "Hood Ornament" Begging your kind indul

Discussion in 'Gen 2 Prius Accessories & Modifications' started by Paul113, Jun 28, 2005.

  1. Paul113

    Paul113 New Member

    Joined:
    Dec 1, 2004
    56
    0
    0
    Location:
    Motown
    I know I've read it on here somehwere but I'll be darned if any of the word combinations I've tried in the search hit.

    Is there a good way to remove the Toyota symbol from the "Nose" or hood if you like?? I'm pretty sure it's just on there with that foam backed adhesive stuff that most body apliques are stuck on with these days. Forgive the tortured grammar. I was going to use a hammer and chisel but thought I'd ask for some suggestion in this brain trust first.
    Thanks,
    Paul
     
  2. popsrcr

    popsrcr New Member

    Joined:
    Oct 21, 2004
    232
    0
    0
    Location:
    Richmond, VA
    Re: Removal of "Hood Ornament" Begging your kind i

    If it is just on with adhesive, use fishing line and a hair dryer. Heat it up and go at it with the fishing line. Take your time. When your done there will be adhesive on the car. Use your finger (not nail!) and rub up as much as you can. Then get some 3M adhesive remover and a soft cloth to get the rest off.
    Once you're done, be sure to rewax the nose.
     
  3. Hybrid_Dave

    Hybrid_Dave New Member

    Joined:
    Jun 12, 2005
    209
    0
    0
    Location:
    Richmond Virginia
    Re: Removal of "Hood Ornament" Begging your kind i

    Thanks for the info popsrcr...I had wanted to do this as well, but wasn't sure if it was attached with the little pegs, that's good news.

    Dave.
     
  4. TonyPSchaefer

    TonyPSchaefer Your Friendly Moderator
    Staff Member

    Joined:
    May 11, 2004
    14,816
    2,498
    66
    Location:
    Far-North Chicagoland
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
  5. Hybrid_Dave

    Hybrid_Dave New Member

    Joined:
    Jun 12, 2005
    209
    0
    0
    Location:
    Richmond Virginia
    <div class='quotetop'>QUOTE(TonyPSchaefer\";p=\"102312)</div>
    for me personally, I like the look of a clean debadged car. The way I see it, I know what I'm driving, and because of the unique styling of the Prius, everyone else on the road does too. but yeah, just because I guess (the answer to why is why not) :p
     
  6. KTPhil

    KTPhil Active Member

    Joined:
    Jan 14, 2005
    1,379
    20
    0
    Improves mileage by 0.0000145 mpg due to lowered turbulence and air resistance.
     
  7. cairo94507

    cairo94507 Active Member

    Joined:
    Dec 24, 2004
    923
    36
    0
    Location:
    Auburn, CA, USA
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Re: Removal of "Hood Ornament" Begging your kind i

    Can someone post a picture or two of the hood w/o the emblem? One head-on and one from an angle would be good. In looking at the hood it appears as if there is a flat spot for the emblem, I want to see what it looks like w/o the emblem first. Thanks.
     
  8. alsgameroom

    alsgameroom Member

    Joined:
    May 16, 2005
    117
    0
    0
    Location:
    Northern New Jersey
    Re: Removal of "Hood Ornament" Begging your kind i

    I'd like to see a pic also.. I'm considering removing my front toyota emblem because I'll be putting a bra on her.

    Not sure yet but I'm thinking the hood portion of the bra will fit tighter and create a better seal from water and dirt getting down in there if I remove the emblem.

    How about the emblems on the rear of the car? are they afixed the same way? I betcha some people out ther might consider removing them also...

    - Al
     
  9. popsrcr

    popsrcr New Member

    Joined:
    Oct 21, 2004
    232
    0
    0
    Location:
    Richmond, VA
    I would be more sure that the rear emblems are on with tape more than the front one.
    As for how it would look, just use photoshop.
     
  10. Paul113

    Paul113 New Member

    Joined:
    Dec 1, 2004
    56
    0
    0
    Location:
    Motown
    <div class='quotetop'>QUOTE(TonyPSchaefer\";p=\"102312)</div>
    I'm going to replace it with one of my bowling trophys. Now aren't you glad you asked?
     
  11. bookrats

    bookrats New Member

    Joined:
    Mar 12, 2004
    2,843
    2
    0
    Location:
    Seattle, WA
    <div class='quotetop'>QUOTE(Paul113\";p=\"102788)</div>
    :clap: :clap: :clap:

    (But what about increased wind resistance and MPG? :mrgreen: )
    [hr:fe8d186fa8]
    Now there's a great idea for a thread: alternative hood ornaments for the Prius!

    Here are some classics that could be used:

    [​IMG]

    [Broken External Image]:http://image12.webshots.com/13/5/89/12/343758912lkCOfl_ph.jpg

    [​IMG]

    [hr:fe8d186fa8]

    And some more, umm, unusual ideas:

    [​IMG]

    [​IMG]

    [Broken External Image]:http://www.judturner.com/hood_gal/birdhand4_2003.jpg
     
  12. alsgameroom

    alsgameroom Member

    Joined:
    May 16, 2005
    117
    0
    0
    Location:
    Northern New Jersey
    Re: Removal of "Hood Ornament" Begging your kind i

    The last photo is for BUSH.. right?
     
  13. galaxee

    galaxee mostly benevolent

    Joined:
    Mar 14, 2005
    9,810
    466
    0
    Location:
    MD
    Vehicle:
    2005 Prius
    the bra goes way over the hood ornament. trust me, it won't help make a tighter seal. just to warn ya. :)
     
  14. KTPhil

    KTPhil Active Member

    Joined:
    Jan 14, 2005
    1,379
    20
    0
    Just because she's got a bra on doesn't mean "protusions" aren't a welcome sight.
    ;-)
     
  15. Danny

    Danny Admin/Founder
    Staff Member

    Joined:
    Nov 24, 2003
    7,094
    2,116
    1,174
    Location:
    Charlotte, NC
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    At least on my MR2 there are 2 prongs that go into the front bumper as well as the adhesive backing. Good luck - let us know how it turns out.
     
  16. bookrats

    bookrats New Member

    Joined:
    Mar 12, 2004
    2,843
    2
    0
    Location:
    Seattle, WA
    And Paul113, please -- if possible, post a picture of your bowling trophy hood ornament on your Prius!
     
  17. Paul113

    Paul113 New Member

    Joined:
    Dec 1, 2004
    56
    0
    0
    Location:
    Motown
    Re: Removal of "Hood Ornament" Begging your kind i

    Looks like the bowling trophy stays on top of the TV next to the rabbit ears with the tin foil on em. The nose cone emblem is located on 2 pegs that fit into 2 small sleeved holes in the hood. and the area that the badge sits on is flat as some astute poster earlier correctly suspected.
    So the nose badge stays. :cussing:
    Namaste,
    Paul
     
  18. alsgameroom

    alsgameroom Member

    Joined:
    May 16, 2005
    117
    0
    0
    Location:
    Northern New Jersey
    Re: Removal of "Hood Ornament" Begging your kind i

    I just took off the hood ornament on my new prius. Guess what... now I have 2 lovely holes where pins go. Sawed the pins right off with the fishing line!

    its going back on right now.

    thanks for the tip NOT :guns: :guns:
     
  19. Hybrid_Dave

    Hybrid_Dave New Member

    Joined:
    Jun 12, 2005
    209
    0
    0
    Location:
    Richmond Virginia
    well, that sucks...sorry you had to find out the hard way, but thanks for warning those of us who would have attempted....

    Dave.
     
  20. Charles Suitt

    Charles Suitt Senior Member

    Joined:
    Oct 8, 2004
    1,637
    16
    0
    Location:
    Dallas TX
    Vehicle:
    2012 Prius
    Model:
    Four
    Re: Removal of "Hood Ornament" Begging your kind i

    :( There is a political forum elsewhere. Spare us your political BS.